Fluna Gun Degreaser
Cleaner and special degreaser
Fluna Gun Degreaser cleans and degreases all firearms and knives. Oils, greases and waxes disappear very fast, even powder smoke and combustion residues are quickly and completely removed. Top: The cleaner does not attack rubber and plastics and thus proves to be a real all-rounder.
Fluna Gun Degreaser is perfect as a gun all-purpose cleaner. Shooters who switch from conventional gun oil to Fluna Tec are on the safe side when it comes to preparatory degreasing. But Fluna Tec regular customers also like to use the practical and versatile cleaner again and again. Make regular gun cleaning as easy as possible – Fluna Tec Gun Degreaser can be used manually and in an ultrasonic bath.
Gun degreasing made easy
Simply drip Fluna Tec Gun Degreaser onto the selected area, spread the degreaser with a dry cloth and simply wipe off the agent together with any existing oils and greases immediately and without leaving any residue. For heavier soiling, repeat the process until the desired result is achieved.
Effective cleaning for barrels
Fluna Gun Degreaser removes powder and dirt from the barrels of rifles, pistols and revolvers. Apply the cleaner to a clean felt plug and slide it from the chamber through the dirty barrel. Now you can use special barrel cleaners such as Fluna Gun Cleaner or Fluna Bore Pro and remove the abrasion of metal fouling with a bronze or brass brush. Finally, wipe through with Fluna Gun Degreaser from the chamber until the felt plug remains clean. The degreased barrel can then simply be recoated with Fluna Gun Coating.
Cleaning of rifle and pistol parts
Fluna Gun Degreaser in the practical dropper bottle enables precise and economical application to dirty surfaces. Allow the gun cold cleaner to act briefly and loosen soiling with a brush if necessary. Wipe everything off with a cloth. After successful cold cleaning, the gun surface is simultaneously degreased and optimally prepared for coating with Fluna Gun Coating. Tip: Fluna Gun Degreaser does not attack paint, rubber or castings! Black powder residues can also be removed quickly and without residue with the cold cleaner.
Properties of Flun Gun Degreaser
- Residue-free cleaning
- Simultaneous effective degreasing
- For firearms, barrels and knives
- Easy and economical application with dropper bottle
- Also suitable for rubber, plastics and castings
- Can be combined with all Fluna Tec Gun Care products
Gun cleaning in clever steps
When you choose Fluna Tec, gun cleaning and care become a time-saving and effective pleasure. The product properties complement each other, the coordination of the products always leads to the same satisfactory result. Experiments are nothing for your technically high-quality weapons – therefore rely on Fluna Tec just like numerous professionals all over the world. Tip: All products are available in specialized stores and online stores.
More Fluna Tec products
Fluna Gun Coating Aerosol
Fluna Gun Coating liquid
Fluna Bore Pro
Fluna Gun Cleaner
Frequently asked questions about Fluna Gun Degreaser
WHY SHOULD I CHOOSE THIS PRODUCT?
It’s simple: cleaning and degreasing of gun parts and barrels is done in just one step. This saves you time and money.
WHAT MATERIALS CAN I TREAT?
Fluna Gun Degreaser can be used on metal parts, but also on plastic, cast iron and rubber. Simply drip on, spread and wipe off – the surface is cleaned and degreased.
HOW CAN I USE THE COLD CLEANER?
You can use Fluna Gun Degreaser for manual cleaning, but also in a practical ultrasonic bath. Used as an ultrasonic bath additive, the cold cleaner can simply be rinsed off with water as usual.
WITH WHAT DO I USE THE CLEANER AND DEGREASER?
It depends on which part of the gun you want to clean. For surfaces, a clean, dry cloth is sufficient; for treating the barrel, use a cleaning rod, felt plugs or patches, and a metal brush.
IS FLUNA GUN DEGREASER SUITABLE FOR PREPARING FOR FLUNA GUN COATING?
Definitely yes! It doesn’t matter if you want to switch from using gun oil to Fluna Tec or if you have been protecting your gun with Fluna Gun Coating for a long time. After cleaning and degreasing with Fluna Gun Degreaser, any surface is perfectly prepared for the application of the high-performance ceramic coating.